How does this Work?

A small amount of electricity (1-3 amps) is channeled through distilled water. This reaction rearranges each water molecule into a gas form with two “H” for Hydrogen bonded together, plus one “O” for Oxygen. A common name for this substance is HHO, or Hydroxygen. This gas is drawn into the engine by a vacuum line, where it will mix with your primary fuel and ignite with it, causing an increase in power.

Is it a Scam?

Absolutely not! Direct evidence from drivers proves this technology every day. A proper understanding of the system is required before one passes jugement. NO, this technology will not allow you to run your car entirely on water (yet). YES, this technology will increase your vehicle’s efficiency, Miles per Gallon, and decrease its emissions.

Does this Violate Thermodynamics/the Law of Conservation?

That is, how does the system create more energy than it uses? The answer is that the laws stay in tact and something a bit different is going on than what many may assume. The sad truth is that the vast majority of the fuel that makes it into a typical engine is ejected as emissions as it is not properly combusted. HHO works by making more of the gasoline or diesel fuel ignite, so energy is being harvested out of what is already there and usually wasted. The result is a more complete and cleaner burn of the fuel.

Will this Work for All Vehicle Types?

This will work on Gas and Diesel engines, in cars, trucks, big rigs, boats, tractors, and motorcycles. Multiple Cells are necessary for optimum performance on larger vehicles. Some vehicles may be designed better from the start and see only a very small increase in efficiency, although this is the exception. If you are fueling with Biodiesel, Ethanol, or Straight Vegetable Oil (aka Grease) – this System will still work for you.

Why isn’t this mainstream?

Great question – because the basic technology has worked for over 200 years, and many patents are on file for devices that accomplish this reaction. Perhaps it has something to do with Board members that serve both oil & car companies at the same time? If you research the subject you will find that big oil companys have been buying up these pattens for years and sitting on them.Thanks to the world wide web, thousands of people are now enjoying this technology, and you can too!

What determines the Efficiency of My Water Fuel System?

How old the vehicle is, the condition of the engine, the climate and altitude of operation, the number of cells connected, and the amount of water in the System are all variables that will alter the efficiency of your system. A dirtier engine will have a greater increase in mileage and efficiency because years of unburnt fuel residue will be cleaned out. The average increase is 20-40%. Adding multiple cells will increase the efficiency in most cases by an extra 5-15%. (Multi-Cell Systems are available from us through Ebay.) Some reports of as much as 75% increase in mileage have been achieved in some cases! To be certain of your MPG increase, measure the change using one of the methods below.

How many Cells are Best for My Vehicle?

Generally the more cells you add, the better your increase in fuel efficiency. It is recommended that you have one HHO Generator cell per 2 liters of engine size. However, the difference between adding 1 to 5 cells for your particular vehicle may not be worth the added cost. It depends largely on how bad you want an extra 5-20% fuel efficiency increase on top of the initial results you experience from the number of cells recommended for your vehicle. Check our Ebay listings for Multi-Cell Systems. Results will vary, however the following guide is a helpful for most:

1 Cell:  Small/Regular Cars, Light Trucks
2 Cells: Cars with V8 Engines, SUVs, Pickup Trucks, Vans, Higher Results for Above
6 Cells: Big Rigs, Large Vans & Pickup Trucks, Higher Results for Above

Is this Safe?

Our systems and others like it produce HHO ‘On Demand’, meaning no dangerous gas is being stored for use later. The gas is produced only when needed and is immediately sent to the engine to be combusted. The Installation Guide teaches you how to safely install and operate this system. This system can be dangerous if used incorrectly however. Follow the rules carefully and use common sense safety when working with the system, such as wearing gloves and goggles, only working on the engine when it is not hot, and refraining from smoking near the HHO generator. Use professional tools, be certain of your engine parts, and ask a certified mechanic for help if there is anything that you are unsure of.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s